|
|
Hydraulic presses CXT
|
Hydraulic
presses for extrusion of non-ferrous metals (aluminium and copper
alloys) in both direct and indirect extrusion process are designed
in type line CXT destined for the production of tubes, bars, profiles
with full and hollow cross sections and wires.
Hydraulic presses of type CXT are of a robust horizontal design. They
are equipped with moving containers and piercing devices (with the
CXT presses only). The prestressed columns of the press build up,
together with the cylinder crosshead and the platen, a rigid press
frame. The presses are designed with all the equipment necessary for
full mechanization and automation of the operation cycle. The moving
container is heated by electric heaters and its temperature is controlled
automatically.
Hydraulic presses of type CXT are of a robust horizontal design. They
are equipped with moving containers and piercing devices (with the
CXT presses only). The prestressed columns of the press build up,
together with the cylinder crosshead and the platen, a rigid press
frame. The presses are designed with all the equipment necessary for
full mechanization and automation of the operation cycle. The moving
container is heated by electric heaters and its temperature is controlled
automatically. |
|
Remote control of the press operation is designed
with a hydraulic-electrical system combined with electronic circuits
which are actuated from a control pulpit by means of pushbuttons
and other controls. The control system is connected to a control
computer which facilitates full automation of the press operation
cycle.
|
| The machines
are driven directly by high-pressure oil pumps installed in proximity
of the press. The drive of low-pressure circuits is arranged above
the cylinder crosshead.
Rigid design of the presses based on well proved
construction groups, reliable hydraulic, electrical and electronic
control elements are decisive for:
- an integral solution of the production process
- good surface quality and dimension accuracy of
extruded products
- safe operation and reliable function
- reduction of auxiliary time values
- reduction of power consumption and operation
staff number
- the application of computer assuring automated
operation cycle contro
|
 |
|
Main technical parameters of CXT presses:
|
|
|
|
|
| TYPE OF PRESS |
CXT 630 |
CXT 1250 |
CXT 1600 |
CXT 2000 |
CXT 3200 |
| Total extrusion force [MN] |
6,3
|
12,29
|
15,4
|
19,74
|
31,05
|
| Piercing force [MN] |
1,01
|
1,90
|
2,45
|
3,08
|
5,05
|
| Information range of container diameter [mm] |
90 ÷ 125
|
130 ÷ 180
|
145 ÷ 225
|
160 ÷ 250
|
200 ÷ 360
|
| Container length [mm] |
500
|
710
|
750
|
800
|
1000
|
| Operating pressure [Mpa] |
25
|
| Extrusion speed *) [mm/s] |
0 ÷ 50
|
*) Depending on quality and cross section of material to be extruded
Parameters can be modified in order to fulfill customer's requirements.
For more information contact us by
|
|
|
